How To Form Injection Back Pressure?

How To Form Injection Back Pressure

Back pressure is one of the important parameters for controlling melt quality and product quality in the injection molding process. Proper back pressure plays an important role in improving product quality. How much do you know how back pressure is formed during injection molding machine processing? First. The formation of back pressure In the process […]

How To Solve The Poor Exhaust Of Injection Molded Parts?

How To Solve The Poor Exhaust Of Injection Molded Parts?

The exhaust of injection molds is a problem that cannot be ignored in mold design. Poor exhaust can cause many problems. For example pores, voids, burnt, bubbles, surface silver streaks, obvious weld lines, etc. The following is the exhaust of injection molded parts analysis of bad faults and troubleshooting methods. 1. Improper equipment selection When […]

4 Parameters In Designing Injection Molds

4 Parameters In Designing Injection Molds

After the read, you can learn the 4 Parameters In Designing Injection Molds Injection volume Clamping force Tie rod spacing Nozzle size check There are two templates on the injection molding machine, one of which is not understood, called a fixed template; the other can be moved, called a movable template. The mold is fixed on the […]