What is a Motorized Slide Gate Valve?
The motorized slide gate valve is a valve in which the gate and the seat are always in close contact and sealed.
The opening and closing member of the motorized slide gate valve is the gate, the direction of movement of the gate is perpendicular to the direction of the fluid, the electric plug valve can only be fully open and fully closed, not for regulation and throttling.
The motorized slide gate valve has two sealing surfaces, the most commonly used mode gate valve has two sealing surfaces to form a wedge, wedge-shaped angle with the valve parameters vary.
What is the working principle of the motorized slide gate valve?
The motorized slide gate valve has a circular opening of the size of the passage, which is opened and closed by the gate so that the circular opening on the gate is completely detached from the passage and coincides with the action.
Advantages of motorized slide gate valves
Tightly sealed for long service life
Made from sealed components, the junction of the screw and cylinder can work normally without an oil supply, and without flying dust.
Excellent material selection, clear thread
Carefully selected cold-rolled steel, not easy to corrosion, not easy to deform, sealing tight, product quality peace of mind, and stable performance.
Beautiful appearance, easy to operate
The back-closing device achieves a dust-free lubrication transmission, eliminating the influence of dust and rust on the transmission, saving time and effort in operation.
Simple installation and reasonable design
Compact structure, reasonable design, smooth operation
The motorized slide gate valves are supplied by DGMF Mold Clamps Co., Ltd, the mold clamps Manufacturer in China that also provides injection mold components, die press components, machine tools, and fasteners for your best choice.
Besides the Motorized Slide Gate Valves, DGMF Mold Clamps Co., Ltd also provides Hopper Slide Valves Gates, Knife Gate Valves, Pneumatic Slide Gate Valves, and Manual Slide Gate Valves for your devices.
Manual/electric/pneumatic slide valves
Drainage type/gate water type/gate air type/unloading type
Features of motorized slide gate valves
Round and Square motorized slide gates are available
Materials selected with care
Measurement and installation
Nominal diameter range: DN50-DN500
Nominal pressure range: 1.0MPa-1.6MPa
Material: cast steel, stainless steel
Gate material: 2Cr13, 201, 304, 316, 316L
Connection form: butt-clamp type
Seat seal ring: Nitrile rubber, EPDM rubber, fluorine rubber
Cladding 2Cr13,, hard alloy
Packing seal: graphite packing, Teflon packing
The Motorized Slide Gate Valves Specifications
Motorized Slide Gate Valve Model: DGMF-Mold-Clamps-SV107
|Motorized Slide Gate Valves Specifications
|C1 X C1
|A1 X A1
What are the applications of a motorized slide gate valve?
Motorized slide gate valves are suitable for metallurgy, building materials, coal, mining, glass, light industry, paper, and other industries, such as ventilation and dust removal, wind power conveying and exhaust air system duct, and solid powder conveying regulation and cut off.
The motorized slide gate valve has a simple structure and is easy to operate. The sliding plate is flexible and has the characteristics of air tightness.