Guide Pins And Bushings
DGMF Mold Clamps Co., Ltd is the mold clamps manufacturer and the mold components supplier in China, we provide the standard guide pins and bushings for your choice.
Pins and. Bushes. Standard Die Set Oil-less Demountable Guide Bushes.
What is a guide pin?
A pin or peg for aligning a tool or die properly with the work as a pilot. It is also called leader pin.
What is a guide bush?
The guide bush is essentially a circular flange, usually between 10mm and 40mm outside diameter, which fixes to the router base and acts rather like a small ring-fence. The cutter plunges through the middle of the bush and the outside edge of the ring runs against the jig or template, to position the cut.
What is the function of the guide pin and guide bush?
Guide pin and bushings — The guide pin and bush align the fixed and moving halves of a mold in each cycle. The material cases are usually made of medium carbon steel and will have higher hardness.
DGMF Mold Clamps Co., Ltd supplies the ejector pins, straight ejector pins, ejector sleeve pins, ejector blades, shoulder ejector pins, guide pins, core pins, angle pins, dowel pins, guide bushing, A-type sprue bushing, B-type sprue bushing, C-type sprue bushing, small gate sprue bushing, big gate sprue bushing, etc.