S83 Heavy-duty Machine Mounts Adjustable Pad Iron
Detailed product introduction of S83 Heavy-duty Machine Mounts Adjustable Pad Iron
S83 Heavy-duty Machine Mounts Adjustable Pad Iron Features
The vibration damping rubber effectively attenuates the vibration of the machine itself, reduces the transmission of vibration force, prevents the transmission of vibration force, and ensures the accuracy and quality of processing dimensions.
Control building structure resonant transmission of vibration force and noise. Make various types of machine tools for rough and finish processing to form a production unit to adapt to the development of logistics technology. The installation of the machine tool does not require anchor bolts to be fixed to the ground.
Good vibration reduction and considerable vertical deflection make the machine stable on the ground. Save installation costs and shorten the installation cycle. The location of the machine tool can be changed at any time according to the production, eliminating the cost of secondary installation and making it possible to install the machine upstairs.
The anti-vibration pad can adjust the level of the machine tool, with a large adjustment range, convenient and fast. The shockproof rubber pad is made of nitrile synthetic rubber, which is resistant to grease and coolant.
S83 Heavy-duty Machine Mounts Adjustable Pad Iron Application
Metal processing machine tools, forging machine tools, textile machinery, printing machinery, food processing machinery, rubber machinery, wire manufacturing machinery, cable machinery, packaging machinery, generators, and heavy equipment, etc.
How to use the machine tool adjustment S83 Heavy-duty Machine Mounts Adjustable Pad Iron?
put the required horn under the foot hole of the machine tool, insert the bolt, screw it until it is in contact with the load-bearing plate, and then adjust the machine level (bolt clockwise rotates, the machine rises); adjust well After the machine tool is level, tighten the nut to fix the horizontal state.
Because of the creep phenomenon of the rubber, when the horn is used for the first time, the machine level is adjusted once two weeks later.
The characteristics of the S83 Heavy-duty Machine Mounts Adjustable Pad Iron
Place the S83 Heavy-duty Machine Mount right below the machine tool adjustment point, and there is a U-shaped hole in the front of the S83 Heavy-duty Machine Mount.
If the equipment is equipped with adjusting anchor bolts, the position of the U-shaped hole of the S83 Heavy-duty Machine Mount should correspond to the machine anchor bolt.
And insert it into a suitable position. Make sure that all the adjustment pads are under force.
After confirming that the adjustment pads are fully accepted, adjust the bolts of the adjustment pads with the horizontal adjustment tool. The adjustment amount of the adjustment shim is 3-15mm.
The mechanism form of the S83 Heavy-duty Machine Mounts Adjustable Pad Iron
The upper and lower two-layer two-sided structure is adopted. In order to meet the adjustment needs, the upper and lower contact surfaces are designed with inclined surfaces.
The material of the S83 Heavy-duty Machine Mounts Adjustable Pad Iron
Use HT200. Or cast steel for larger load-bearing requirements. This product has a simple structure, stable performance, easy adjustment, large bearing capacity, saves installation costs, shortens the installation cycle, and can be moved for secondary use.
The appearance of the S83 Heavy-duty Machine Mounts Adjustable Pad Iron
Paint the unprocessed surface with blue or green paint, adjust the meshing surface for anti-rust treatment, and apply anti-rust oil to the bolt holes.
S83 Heavy-duty Machine Mounts Adjustable Pad Iron selection
1. The weight of the machine tool and the number of fastening holes on the machine base;
2. The bearing value of each shim = the total weight of the machine divided by the number of fastening holes;
(Under conditions, consider the position of the center of gravity of the machine tool to determine the weight distribution)
3. The result is selected according to the type of machine tool used;
4. Check whether the diameter and length of the machine tool base hole and bolt are consistent.
S83 Heavy-duty Machine Mounts Adjustable Pad Iron specifications
The load capacity of the S83 Heavy-duty Machine Mounts Adjustable Pad Iron is the main factor of its specifications and materials (the specifications and load description tables are attached below)
Please contact the DGMF team which specification is available before placing an order, thank you.
Machine Anti-Vibration Mounts
The shim pad iron mounting is an indispensable and important part of the production line. It is placed under the machine, supports the weight of the machine, and has the function of shock absorption.
It is commonly used for CNC machine tools to attenuate the machine’s own vibration and reduce the transmission of vibration force. It will prevent the transmission of vibration force and can also adjust the level of the machine tool. It is widely used in various processing equipment and food machinery production lines.
The Machine Anti-Vibration Mounts Shock Absorption Pad Iron Machine Anti-Vibration Mounts, Anti-Vibration Pad Wedge Mounts, S83 Heavy-duty Machine Mounts Adjustable Pad Iron are also supplied by DGMF Mold Clamps Co., Ltd, contact us for more information you need, thank you.
DGMF Mold Clamps Co., Ltd is the S83 Heavy-duty Machine Mounts Adjustable Pad Iron supplier in China, we provide the injection mold components, die press components, machine tools, fasteners for your best choice.
Contact us for more S83 Heavy-duty Machine Mounts Adjustable Pad Iron details.
There are no reviews yet.