G-shaped C clamp is a kind of G-shaped hardware tool used to clamp various shapes of workpieces, modules, etc. it is used for fixing.
The G-shaped C clamp is also called G clamp, C-shaped clamp, woodworking clamp, and so on. It has a wide range of use and is convenient to carry.
The G-clamp C clamp adopts a screw-in design, which can freely adjust the clamping range and has a large clamping force. Usually forged from high carbon steel. The overall heat treatment has strong durability and greater strength.
C clamp G clamp structure usage
The G-clamp adopts a threaded screw-in design, which can freely adjust the clamping range and has a large clamping force. It is hot-forged with No. 45 high-quality carbon steel. The overall heat treatment has strong durability and greater strength. Nodular cast iron, the screw rod is galvanized or blackened.
A detailed explanation of C clamp G clamp
Metal can improve its structure and mechanical properties after forging. After the casting structure is deformed by the forging method, due to the deformation and recrystallization of the metal, the original coarse dendrites and columnar grains become the equiaxed recrystallized structure with finer grains and uniform size.
Which makes the original segregation in the steel ingot, the compaction, and welding of looseness, pores, slag inclusions, etc., make the structure more compact and improve the plastic and mechanical properties of the metal.
The mechanical properties of castings are lower than the mechanical properties of forgings of the same material.
In addition, the forging process can ensure the continuity of the metal fiber structure, keep the fiber structure of the forging consistent with the shape of the forging, and the metal streamline is complete, which can ensure that the parts have good mechanical properties and long service life.
Forgings produced by precision die forging, cold extrusion, warm extrusion, and other processes are unmatched by castings.
How to use C clamp G clamp?
The operation of the G clamp is relatively simple, just use the adjustment screw bolt to control the tightness.
Woodworking clamp F clamp
A woodworking clamp is an indispensable tool for woodworking. It has a simple structure and dexterous use. It is a good helper for woodworking.
Woodworking clamp F clamp classification
Generally, it can be divided into F-type woodworking clamp, G-type woodworking clamp, and A-type woodworking clamp according to the appearance characteristics.
F structure usage
F folder structure detailed explanation
The F-type woodworking clamp includes a guide rod, one end of which is fixedly connected with a fixed arm, the rod body is fitted with a movable arm, a handle screw is installed near one end of the movable arm, and a lower pressure block is livelily installed on the top of the handle screw, corresponding to the fixed arm one end of the lower pressing block is provided with an upper pressing block, the lower part of the guide rod is provided with a hexagonal hole, and the lower end of the guide rod is provided with a bayonet to prevent the guide rod from slipping.
How to use an F-type woodworking clamp?
Slide the movable arm by hand. When sliding, the movable arm must remain parallel to the guide rod, otherwise, it will not slide and slide to the width of the workpiece, that is, the workpiece can be placed between the two-moment arms, and then slowly rotate the movable arm.
The screw bolt is used to clamp the workpiece, adjust to the suitable tightness, and let go to complete the workpiece fixing.
There is a bayonet on the guide rod to prevent the guide rod from slipping off and ensure that it will not loosen when clamping the workpiece.
There is a block on each of the two lever arms to prevent the workpiece from being fouled while clamping the workpiece vigorously.